1. Before applying LIP-INK™ COLOR, cleanse your lips with the OFF solution. Using a soft cloth or a cotton pad gently, dab lips (never scrub). This will remove any remaining lip products or residue from your lips, as foreign matter will interfere with the performance of LIP-INK™ Cosmetics. This step also aids the exfoliation process (see page 10).

2. Splash lips with water and pat dry.

3. If you line your lips, follow instructions above. If you do not use liner, please continue.

4. Apply a small amount of LIP-INK™ SHINE moisturizer as a base conditioner and massage thoroughly into your lips.

5. Shake the vial of LIP-INK™ COLOR you have chosen against the palm of your hand until the beads move freely. Carefully remove the applicator wand and wipe the excess back into the vial. Remember to keep the vial in an upright position.

6. Apply color to relaxed lips using the widest portion of the applicator. With a gentle even pressure move in one direction only. Do not blot. The slower the application the more color is absorbed. Allow 10 seconds for LIP-INK™ COLOR to dry.

7. Repeat the color application twice for a total of three layers, allowing ten seconds for each layer to dry.

8. Finish with a final coat of SHINE moisturizer. A small amount will leave a slight sheen, if blotted a matte finish will be the result. A high gloss can be achieved by a liberal application. The SHINE can be applied throughout the day without disturbing your lip color.

9. Remove LIP-INK™ COLOR by applying the OFF solution to a cotton ball, make-up pad or a warm, lightly moistened, dark colored wash cloth. Press to the lips allowing a few seconds for the OFF solution to break down the pigment. Gently dab the lips (never scrub) to wipe away the finish, flipping the pad, or cloth as you do so. After color is removed, splash lips with water and pat dry.